Outrigger Stabilizer Floats for
Kayaks
|
LOW SHIPPING
RATES ON ALL STABILIZERS*
*Lowest Cost to Your Location. |
|
MADE IN THE USA
FROM AMERICAN MADE COMPONENTS
|
Don't be misled by the
Imitations - This is the Original Stabilizer System. Many Others
are made from or assembled with Foreign Parts. Check
the Imitators Closely, as some of Their Floats are only
Inflatable Material - Not Tough , Rugged and Dependable
like the Original American Canoe & Kayak Outrigger
System.
|
|
Great for Fly Fishing
Quickly
installs or removes without any tools
|
Eathafoam Stabilizer Floats are charcoal gray in color, not white as seen in
these photos
Two Styles of Floats are Available
Floats telescope out to a 6 ft spread, and they quickly
attach without any tools
Floats can be adjusted up and down to allow clearance between
water when traveling or contact with water when still
|
|
Eathafoam Floats are soft, solid and pliable
|
Hydrodynamic Floats are rigid with hollow interior
|
| Stabilizer frame will
attach with small brackets to any point on your kayak. Specify widest portion of
kayak and frame will fit any distance smaller. Middle, Bow or Stern
|
-
Eatha Foam Floats are 27" long and 6"
diameter
-
Floats have a 6" vertical adjustment
(12" Maximum to Bottom of Float)
-
Eatha Foam Floats telescope from 0" to
18" out
-
Floats are gray, but can be painted
-
Eathafoam floats weigh 1.1 lb each
-
***
-
Hydrodynamic Floats are 42" Long and 6"
Diameter
-
Hydrodynamic Floats have off-center pins to help
Keep Floats Tracking the boats path while in water
-
Hydrodynamic Floats have a 10" vertical
adjustment
(16" Maximum to Bottom of Float)
-
Hydrodynamic Floats telescope from 0"
to 18" out
-
Hydrodynamic Floats are rigid polyethylene and
weigh 4 lbs each
|
|
|
Hydrodynamic Floats on Kayak |
|
Hydrodynamic Float
|
|
|
Stabilizer quickly removes from Brackets
|
|
Stabilizer Floats can be adapted to small cockpit Kayaks by
installing brackets as shown. All hardware is included.
Specify Model and Width of your Kayak |
|
Also can be installed on most Sit on Top
Kayaks as long as you have access through
a hatch or opening to install brackets
|
The floats are standard gray in color, but they can be painted with
most spray paints, such as this customer did to match his Hobie Mirage
|
|
Stabilizer for Small Cockpit
Kayaks or Certain Sit on Tops
Model SF-KS -EF with eathafoam floats
228.00
+ The Lowest Shipping Cost in the 48 USA
|
|
Stabilizer for Small Cockpit
Kayaks or Certain Sit on Tops
Model SF-KS-HD with hydrodynamic floats
328.00 +
The Lowest Shipping Cost in the 48 USA
|
Which
Model Is Best for You?
SF-KS-HD Hydrodynamic Floats are What Most People
Order for a Kayak. They are Larger and Offer Even Greater Stability.
They are Designed to Travel in the Water, While Paddling. The Hydrodynamic
Floats Have an Offset Pivot Point - This helps them Track Alongside Your
Kayak .
SF-KS-EF Eathafoam Floats Work Well on Kayaks, but if You
Place Them Aft the Cockpit, Some Find it Challenging to Reach and Lower
Them Behind Your Back. Since the Eathafoam Floats are on a Center Pivot,
They are not Designed to be in the Water While You Travel. Keep Them
Raised out of the Water and if You Start to Tip, They Will Prevent You From
Tipping Over. When you Arrive at a Location Where You Want Extra
Stability, A Quick Turn of the Knob Lowers Them into Contact with the Water.
Both Models Attach to Any Point Stem To Stern on Your
Kayak Many Attach Them Behind or Aft of the
Cockpit as a Convenient Spot, However, You Have the Flexibility of
Putting Them at any Position You May Prefer. We Suggest you Try A
"Dry Run" before Permanently Mounting the Hardware and
Test That Your Paddle Stroke Won't Be Affected By the Float Position.
|
